InnoSwitch3-MX

Off-Line Multiple Output QR Flyback Switcher IC with Integrated 650 V or 725 V Switch, Synchronous Rectification and FluxLink Feedback

This product must be paired with InnoMux controller IC.
Typical Application / Performance

Data Sheets

InnoSwitch3-MX Data Sheet(New!)

Off-Line multiple output QR flyback switcher IC with integrated 650 V or 725 V switch, synchronous rectification and FluxLink feedback, must be paired with InnoMux controller IC
(1.02 MB)
Download PDF View PDF

Product Details

This version of InnoSwitch3 is intended to be used with InnoMux for multiple output, single-stage power supplies for monitors and TVs. This enables very high system efficiency on a small PCB foot print.

The InnoSwitch3-MX dramatically simplifies the development and manufacturing of multiple output power supplies, particularly those in compact enclosures or with high efficiency requirements. The InnoSwitch3-MX architecture is revolutionary in that the devices incorporate both primary and secondary controllers, with sense elements and a safety-rated feedback mechanism into a single IC.

Close component proximity and innovative use of the integrated communication link, FluxLink, permit accurate control of a secondary-side synchronous rectification MOSFET with Quasi-Resonant switching of primary integrated high-voltage switch to maintain high efficiency across the entire load range.

Product Highlights

Based on InnoSwitch3

  • Partner IC to InnoMux
  • High efficiency across full load range
  • Incorporates a multi-mode Quasi-Resonant (QR) / CCM flyback controller, 650 V or 725 V switch, secondary-side sensing and synchronous rectification driver
  • Integrated FluxLink™, HIPOT-isolated, feedback link
  • Instantaneous transient response ±5% CV with 0%-100%-0% load step

EcoSmart™ – Energy Efficient

  • Easily meets all global energy efficiency regulations
  • Low heat dissipation

Advanced Protection / Safety Features

  • Primary sensed output OVP
  • Open SR FET gate detection
  • Hysteretic thermal shutdown
  • Input voltage monitor with accurate brown-in/brown-out and overvoltage protection

Full Safety and Regulatory Compliance

  • Reinforced insulation
  • Isolation voltage >4000 VAC
  • 100% production HIPOT compliance testing
  • UL1577 and TUV (EN60950) safety approved
  • Enables designs that have “A” performance criteria for EN61000-4 suite of test standards, including EN61000-4-2, 4-3 (30 V/m), 4-4, 4-5, 4-6, 4-8 (100 A/m) and 4-9 (1000 A/m)

Green Package

  • Halogen free and RoHS compliant

Applications

Power Table

Output Power (Watts)
PRODUCT3

BV
Rating

85-265 VAC

Nominal
Continuous1
Max
Continuous2
INN34x4C650 / 725 V18 W23 W
INN34x5C650 / 725 V22 W28 W
INN34x6C650 / 725 V28 W35 W
INN3467C650 V35 W44 W
INN3477C725 V32 W40 W
INN3468C650 V40 W50 W

Notes:

  1. Continuous power using nominal primary current limit in a typical open frame application at +50 °C ambient with adequate PCB thermal design to ensure package temperature <125 °C.
  2. Continuous power using maximum primary current limit in a typical open frame application at +50 °C ambient with adequate heat sinking to ensure package temperature <125 °C.
  3. Package: InSOP-24D.

Product Documents

Design Examples

Related Products

Product Image